● Each vibrating toy features 3 vibrating speeds and 9 pulsing patterns.
● Contoured surfaces on the bullet and c-ring massage the clitoris.
● Use the c-ring or bullet vibrators with or without their remotes.
● Tease near and far! Each remote and toy has a 32 ft./10 m range.
● Rechargeable design—compatible with replacement charger PureCharge USB Cord – B.
● Bath-friendly—c-ring and/or bullet can be submerged up to 1 meter/3.28 feet for up to 30 minutes. Wireless remotes are not suitable for water play.
● Bullet Vibrator—Run time: 2 hours (high) to 3 hours (low), charge time: 1 hour.
● Wristband Remote—Run time: 50 minutes (high) to 3 hours (low), charge time: 1 hour.
● C-ring Vibrator—Run time: 50 minutes (high) to 1.5 hours (low), charge time: 1 hour.
● Handheld Remote—50 minutes (high) to 1.5 hours (low), charge time: 1 hour.
● Bullet: length: 3 in./7.5 cm; width: 1.25 in./3 cm
● Wristband remote diameter: 5.5-8.75 in./14-22 cm
● C-ring: length 3.5 in./8.5 cm, width: 1.75 in./4.5 cm, ring diameter: 1.25 in./3 cm

These products may arrive partially charged. Before use, charge completely. To charge products, use USB power cords provided. Bullet & Wristband Remote: Insert one charging pin into the bullet’s circular indentation above the DC marking. Insert other charging pin into the side of the wristband remote, above the DC marking. C-ring & Handheld Remote: Insert one charging pin into circular indentation on the side of the c-ring above the DC marking. Insert other charging pin into the circular indentation on the bottom of the handheld remote. Lights illuminate and flash while charging. When products and remotes are fully charged, lights stop flashing and remain illuminated.

Vibrators can be used with or without the remotes.

Using the Vibrator(s) Alone: To use the bullet or c-ring alone, hold vibrator power button for 3 seconds to activate. Light will flash and product will vibrate once to indicate it is on and in standby mode. To cycle through speeds and pulsing patterns, push bullet function button or c-ring power button. To turn off bullet or c-ring, hold power button on vibrator for 3 seconds.

Using the Bullet with Wristband Remote: Push power button on the wristband remote. Light will turn on and remain illuminated to indicate wristband remote is on and in standby mode. To turn the vibrator on, hold vibrator power button for 3 seconds to activate. Light will flash and product will vibrate once to indicate it is on and in standby mode. To cycle through speeds and pulsing patterns, push remote function button. To turn vibration off, push remote power button; this will also turn off the wristband remote. To turn off vibrator completely, hold vibrator power button for 3 seconds. Lights will turn off to indicate vibrator and wristband remote are off.

Using the C-ring with Handheld Remote: Hold vibrator button for 3 seconds to activate. Light will flash and product will vibrate once to indicate it is on and in standby mode. To cycle through speeds and pulsing patterns, push remote button. To turn vibration off, hold remote button for 3 seconds; product is now in standby mode. To turn off vibrator completely, hold vibrator button for 3 seconds. Light will turn off to indicate product is off.

● Bullet Vibrator & Wristband Remote
● C-ring & Handheld Remote
● USB Charger Cords